Description
These base pads are injection molded from glass reinforced nylon, and they are super tough and resistant to impact. Our pads fit and install the same as the factory floor plates, use the factory retainer plate (magazine insert), and no extra parts are required.
The 10-8 pad is slightly thicker than the factory pad, and features angled sides and front to allow for easy stripping of stuck magazines. The pads also feature a grooved front and scalloped sides for positive grip during manipulations. The bottom of the pad features our usual dimples for marking your magazines.
- Fits Glock factory magazines for the double column 9mm, .40 S&W, .357 Sig, .45 GAP and Glock 44 (.22 cal), Gen2 and newer.
- Also fits Glock 44 .22 rimfire magazines and 9/.40 restricted capacity magazines as the tubes are externally identical to the standard capacity magazines.
- NOT compatible with early production non metal lined (Gen1) Glock magazines, or the single column Glock 43, 43x/48 magazines.
- NOT COMPATIBLE with Glock 26/27 where the magazine base pad has to fit in a recess in the frame.
- **Magazines with our pads DO fit in the Gen 5, 17M/19M, and 19X. The Glock 19X frame has a lip at the front and our pads will just barely clear.
- Fits KCI and ETS Glock magazines.
- DOES NOT fit Magpul Glock magazines.
Compatible with many magazine wells, including the Raven Concealment Systems Freya, Magpul, Zev Pro, Battle Arms Development, Killer Innovations, and Overwatch Precision. Is known to be INCOMPATIBLE with the Zev Universal Pro magwell. Please note that with certain mag wells (including Magpul and Zev Pro), individual frame/magazine combos may exhibit tolerance stacking and our base pad may interfere with the ability of the mag to lock into place when loaded.
Our pads are roughly the same footprint as the pre Gen5 (the ones without the extended front toe) Glock OEM base plates. If you are trying to determine if our pad fits in your after market mag well, look at how much space is around that style of factory pad, and if it's already really tight, then our pad probably won't fit due to the slight flare. If there's lots of room, then you're probably ok.
Coyote and Olive Drab pads are limited production runs and may be priced differently. The colors were matched to new production Glock Gen4/5 frames, but Glock production runs vary in hue, so we can't guarantee an exact match to your particular frame. **We changed the name of our "Glock Dark Earth" pads as our color seems to match the Glock 19X Coyote better.**
Weight: .24 oz.
**SOLD AS A SET OF FOUR (4)**
**NOTE: We do not recommend excessive disassembly/reassembly of Glock magazines, as the retainer tabs molded on the bottom of the magazine tube are relatively soft and will ding up with each time the pad comes off or goes on the tube. This happens with both Glock factory pads as well as ours. We do not find that Glock magazines get a lot of dirt inside, so it is typically unnecessary to disassemble them for anything other than spring replacement.
Common questions answered:
- Will you be making this for the .45 ACP/10mm magazines?
- Not any time soon, due to limited demand.
- Are these easier to remove and install than the factory base pads?
- No, they remove and install exactly the same way. Keep in mind that "easy to remove" ends up meaning that the magazine will come apart when it hits the ground.
Product Reviews (41)
-
Glock magazine base plates
I use a color code system for quick caliber identification for my various Glock magazines (green for 9mm). I had been looking quite awhile for green base plates to refit my OEM gen3 G19 mags. In addition to the green color, I required a base plate that would fit into the flared aftermarket magwell I use, and it would not accept Gen5 Glock base plates. The 10-8 base plates were exactly what I needed. They are very nicely executed and easy to install. The angled profile on them just clears the Mapul magwell. I should have ordered more. Obviously, I’m very pleased with my purchase and customer service experience. Thanks Mio!
-
Glock Basepads
Excellent fit with aftermarket magwell (Agency) and like the fact shooter can mark each magazine to ID each one. SUPER FAST shipping from 10-8.
-
10-8 Glock Base Plate Review
Stout baseplate that clearances a 19X strange subtlety.
-
Glock Base Pads
Well built. They can take a beating. I drop them on pavement constantly and have never had a feeding issue. These base pads are compatible with TTI and Agency magwells.
-
Glock basepad
Great product.. works great! Have them on all my Glocks
-
MAG BASEPLATES
Perfect fit with Glock 17 mags on my 19x
-
Basepad s
Best I’ve used yet. Well made. Buy some now
-
Perfect
These worked great with my Mag-Pul & Zev magwells.
-
Required for Gen 5
I don't know how I ran my gen 5 17 without these. They provide just enough material to get a good purchase to strip the mag when needed
-
Objective met
Wanted my Glock 17 mags to be compatible in my 19X and these do the trick! They appear and feel durable so I confidently expect these base plates to last a long time.