Home > 1911 > Reverse Spring Plug, Springfield 5" Cone/Bull Barrel >
Reverse Spring Plug, Springfield 5" Cone/Bull Barrel Reverse Spring Plug, Springfield 5" Cone/Bull Barrel
Reviews

Reverse Spring Plug, Springfield 5" Cone/Bull Barrel

$20.95

**For Springfield TRP Operator, Emissary, and Prodigy models ONLY, which have a 5" Government Model length CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.  

**IF YOUR GUN HAS A BARREL BUSHING, THIS IS NOT FOR YOUR GUN!  You want our standard Recoil Spring Plug.

Reverse collar spring plug for 5" cone barrel Springfield TRP Operator, 5" cone barrel Emissary .45/9mm, and 5" Prodigy 1911 DS.

Eliminates need to use factory guide rod and open plug, which requires the use of a paper clip or other tool to capture the spring for takedown. No more! This plug has the same concave solid end as our GI format 1911 plugs, and allows the TRP Operator, Emissary, or Prodigy to run a standard GI style guide rod setup.

Fits in from rear of spring tunnel, exactly the same as the factory part.  Reconfiguring your gun requires this plug, a GI length guide rod (order ours HERE), and a standard recoil spring (the factory spring is fine). 

Stainless, glass bead finish.

 

 

Full Description
Qty
  • Description

    **For Springfield TRP Operator, Emissary, and Prodigy models ONLY, which have a 5" Government Model length CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.  

    **IF YOUR GUN HAS A BARREL BUSHING, THIS IS NOT FOR YOUR GUN!  You want our standard Recoil Spring Plug.

    Reverse collar spring plug for 5" cone barrel Springfield TRP Operator, 5" cone barrel Emissary .45/9mm, and 5" Prodigy 1911 DS.

    Eliminates need to use factory guide rod and open plug, which requires the use of a paper clip or other tool to capture the spring for takedown. No more! This plug has the same concave solid end as our GI format 1911 plugs, and allows the TRP Operator, Emissary, or Prodigy to run a standard GI style guide rod setup.

    Fits in from rear of spring tunnel, exactly the same as the factory part.  Reconfiguring your gun requires this plug, a GI length guide rod (order ours HERE), and a standard recoil spring (the factory spring is fine). 

    Stainless, glass bead finish.

     

     

  • Reviews

    Reviews

    Charlie Martin

    Great part

    Perfect replacement for my TRP operator. Dropped right in with no issues.
    Joe

    Reverse Plug

    Giving it 4 stars because I had to fit this plug in my Emissary, thought it was a drop in part.
    Brian Hester

    Great company

    Excellent company Worth while information
    Jason White

    Revers guide Rod

    Very good craftmanship!
    Filip K.

    TOP-NOTCH

    I am writing this review, despite it being somewhat redundant given the existing number of reviews, to make a point of how good this reverse spring plug is, especially in combination with the 10-8 standard guide rod for the TRP Operator. I just installed both on mine, using the OEM Springfield recoil spring. Cannot wait to put down countless rounds at the range.... Thanks Hilton!
    Christopher Rickman

    TRP reverse plug

    Fits perfectly, makes takedown easier, and looks great!
    Christopher Rickman

    TRP reverse plug

    High quality, dropped right in , and looks terrific
    Ed Costello

    TRP Operator Reverse Plug

    The fit was absolutely perfect! Getting it reassembled was a little tricky at first (I shot the guide rod across the room a couple of times!), but once I figured out a good technique it went together without a problem. Functions great! I really wanted a traditional setup instead of a two-piece or full length, and this fits the bill perfectly!
    Michael

    Review for 10-8 TRP Operator Reverse Plug

    I wasn’t a fan of the FLGR on my TRP Operator. I didn’t have any performance issues. It was just having to rely on a tool for disassembly as well as not having the option for one handed slide racking. The 10-8 reverse plug not only allowed me to convert back to a GI rod but in my opinion makes an iconic pistol look even better! Well made with a perfectly matched finish to the bull barrel. Well done 10-8! Thank You!
    Jesus Lopez

    Delivery

    Great product but the mail service sucks. Received it a week later.

Related Products