Description
**For Springfield TRP Operator, Emissary, and Prodigy models ONLY, which have a 5" Government Model length CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.
**IF YOUR GUN HAS A BARREL BUSHING, THIS IS NOT FOR YOUR GUN! You want our standard Recoil Spring Plug.
Reverse collar spring plug for 5" cone barrel Springfield TRP Operator, 5" cone barrel Emissary .45/9mm, and 5" Prodigy 1911 DS.
Eliminates need to use factory guide rod and open plug, which requires the use of a paper clip or other tool to capture the spring for takedown. No more! This plug has the same concave solid end as our GI format 1911 plugs, and allows the TRP Operator, Emissary, or Prodigy to run a standard GI style guide rod setup.
Fits in from rear of spring tunnel, exactly the same as the factory part. Reconfiguring your gun requires this plug, a GI length guide rod (order ours HERE), and a standard recoil spring (the factory spring is fine).
Stainless, glass bead finish.
Product Reviews (26)
-
TOP-NOTCH
I am writing this review, despite it being somewhat redundant given the existing number of reviews, to make a point of how good this reverse spring plug is, especially in combination with the 10-8 standard guide rod for the TRP Operator. I just installed both on mine, using the OEM Springfield recoil spring. Cannot wait to put down countless rounds at the range.... Thanks Hilton!
-
TRP reverse plug
Fits perfectly, makes takedown easier, and looks great!
-
TRP reverse plug
High quality, dropped right in , and looks terrific
-
TRP Operator Reverse Plug
The fit was absolutely perfect! Getting it reassembled was a little tricky at first (I shot the guide rod across the room a couple of times!), but once I figured out a good technique it went together without a problem. Functions great! I really wanted a traditional setup instead of a two-piece or full length, and this fits the bill perfectly!
-
Review for 10-8 TRP Operator Reverse Plug
I wasn’t a fan of the FLGR on my TRP Operator. I didn’t have any performance issues. It was just having to rely on a tool for disassembly as well as not having the option for one handed slide racking. The 10-8 reverse plug not only allowed me to convert back to a GI rod but in my opinion makes an iconic pistol look even better! Well made with a perfectly matched finish to the bull barrel. Well done 10-8! Thank You!
-
Delivery
Great product but the mail service sucks. Received it a week later.
-
10-8 Review Plug
Great part. Fit was exact. Almost thought it didn't fit at first it was so snug but you just need to get the angle straight on and it'll go in. Looks great.
-
Reverse spring plug for Springfield TRP OPERATOR
Was never fond of the captured- spring recoil system of the TRP, admitting though, it functioned well. Was a pain to field strip. The 10-8 reverse spring plug allows use of regular Govmnt.Model recoil spring guide & spring. Works equal to the original and much easier for maintenance. Thumbs up!
-
Makes life much easier.. your thumbs will thank you!
The original plug design on the TRP was solid but a real pain to take down and clean,,, the pressure to move it forward and get a small clip or dowel in there to hold was always a bother and few smashed thumbs. Now it is much easier and with practice and the third take down easy as could be. I am cleaning more often! I am using a flat Wilson Combat spring and all is well the gun works as before, just a faster easier takedown and cleaning processes. Worth the investment, yes, along with my new 10-8 rear sight!! my TRP is rocking!
-
Much better
Great product! Very strong conversion for the TRP. Rquires a little practice with the GI guide rod but I highly recommend.
