Description
*While this part is a drop in fit in many pistols, gunsmith fitting may be required on some guns. The .200" (nominal) diameter pin is typically bigger than your factory unit (they tend to run .195-.199") and may not fit into the frame hole. The larger diameter pin can create a tighter lockup with the barrel's lower lugs, sometimes such that the gun will not go into battery without gunsmith fitting.
**A popular question is "will this fit in my XXX 1911." As above, every single 1911 will be a little different, and may or may not require gunsmith fitting.
***This part was the OEM slide stop for the Staccato 2011's from 2018-2020, and their current slide stop has a similarly shaped lever. As much as we'd like to sell you a slide stop, you may not gain much from fitting a 10-8 slide stop to a current Staccato. Further, the Staccato factory machines the barrel lugs to the slide stop in your gun, so that they are dimensionally matched for optimum lockup and accuracy. You cannot simply drop in a new slide stop into your Staccato, and doing so may likely result in a fit inferior to the factory's work. For users new to the 1911/2011, the slide stop is to be depressed with the support hand during the reload, and this lever does not extend to the rear to make your gun like a Glock.
Our second generation slide stop is an all original design that is totally reengineered to provide you a whole new level of functionality.
- Unique pad shape that only protrudes approximately .050" more than a GI style, but with a ledge shape that provides a more positive shelf for manipulation
- Interior of lobe angled for easy installation - no more scratches on your slide!
- Engagement surfaces optimized for positive lockback
- Geometry improves slingshot slide release during reloads
- Design improves detent spring pressure to minimize chance of premature lockback
- Optimum diameter .200" (nominal dimension) pin for improved lockup
- Right end of pin has protruding convex domed tip, same as GI slide stops
- Pin is nominal .870" as measured from interior of slide stop plate to the tip of the convex pin
Fits all 1911 pattern pistols, including Govt/Commander/Officer sizes and 2011/Caspian/Para double column frames. Also fits Springfield EMP, which will accept the 9/.38/.40 versions.
.45 ACP version has .200" lobe protrusion.
9mm/.38/.40 version has .220" lobe protrusion. **All calibers other than .45 will use 9/.38 slide stop**
Machined from bar stock and heat treated.
Carbon steel version has matte black phosphate finish.
Stainless Steel version has matte bead blast finish.
Product Reviews (159)
-
Perfect fit
Part installed without issue on SA TRP. It works fine, so far. No complaints.
-
Looks good, needs fitting
Nice looking part, but did not fit the slide on my Springfield TRP. The slide was just a bit too thick at the notch.
-
Slide stop Gen 2
Excellent dropped right in to my Springfield Armory TRP, functions great.
-
True Drop In w/ no fitting
Bought this for my SA TRP. It dropped right in with no fitting required and functions flawlessly. Quality part!
-
Smooth as silk
I ordered the slide stop for my new Sig Saur 1911 45 caliber; opened the package and pulled the old part out and put the new part in less that 5 minutes. It has worked great ever since. I didn't have to modify anything, no filing or wet sanding. It was a perfect all around part.
-
1911 Slide stop
still waiting for it to be installed at my gunsmith with the rest of he parts I got from 10-8, a visual inspection of the new slide stop is impressive by its self. Its flawless, for such a small piece.
-
generation two slide stop
Outstanding part!dropped right in with no fitting required. Fit is much better than factory slide stop that came on the pistol.
-
Fit the Bill Perfectly!
This replacement part fixed the slide lock problem with my Sig Scorpion 1911 immediately. Finish matched the trigger and hammer finishes very well. Can not tell it was not an OEM part, other then it functions better then the OEM.
-
love it
love the slide stop, needs fitted for my para's but i know have 3 of them, only way to go!!!!!!
-
Great part.
Received my part quickly. Originally bought this to avoid the idiot mark while installing. Make installing a breeze, also like the extended shelf for reloading from empty. Dropped right into my Colt.
