Front sight for Walther PPQ. Requires use of 3/16" nut driver (order one HERE) for installation. Serrated face, .180" tall x .125" wide, height matches factory front sight (factory front is .180" tall and .140" wide) and is compatible with factory rear sight or our rear sight. Finished in black QPQ, equivalent to factory Melonite style finish on the slide.
Available with green .075" Trijicon tritium insert with no white outline and Fiber optic. **Brass bead is discontinued.
**Due to the relatively uncommon nature of the various other Walther polymer pistols, we have not tested our sights on the other models. It is our understanding that these will also fit the Walther P99, PPS and PPX.
ReviewsI use the 125 front with the 140 rear on my P99's. Awesome sight picture, and like lightning on the target. Highly recommended!Edward
Sights are great, Support not so muchI ordered the front and back sights for my PPQ. The sights themselves are both great and are a huge upgrade. Unfortunately, they don't come with the nut driver you need to install the front site or instructions on how best to install them. I was able to make it work, but when other companies provide everything you need to install their sights when you order (XS includes detailed instructions, nut driver, AND loctite) it's disappointing that 10-8 doesn't. What makes it worse is nowhere on the product page for the sights does it say that the nut driver should be purchased separately.Lawrence Nielsen
Easy installation.Installs very easily, easier to acquire than the oem sight.Christopher Weismann
Quality SightI purchased this sight to replace the plastic sights that came on my P99. Fit and finish are excellent, and installation was a snap. Paired with the 10-8 rear, it's a super accurate combo! Since installing, my accuracy @ 25 yards has increased!
Returning ProductOrdered the Tritium for Walther POQ M2 and requesting return as I cannot easily aquire front sight. It is too tiny to quickly aquire and align with rear sight. This delay could cause harm to me from the bad guy or in a tournament lower my response time.
PPQ Front fiber opticI purchased the Front fiber optic sight for my PPQ M2 9mm and had no point of impact change when using along with the stock rear sight. The sight seems high very high quality and came with about 1.75" of both red and green fiber optic material. You might want to purchase the Glock front sight tool for easy installation however. Very pleased, would do over again in a heartbeat.Timm C
POA = POI for PPQ 9mm 5"Installed the site with with the yellow fiber optic. Very pleased I have read people have not been pleased with other manufactures due to a very slight difference in the height in the front site throwing off the point of impact as compared to the original sites. Great after market sight in performance and value.T.O.
Bought HiViz and Tritium Front Sights for Walther PPQ M2 45The Hiviz is really great in outdoors conditions and the Tritium sight works well at night. I shoot a lot and can change between the two sights in about 2-3 minutes. I do suggest you order a Glock front sight from 10-8 Performance as well to make this an easy task. 10-8 Performance makes doing business easy.BLDaugherty
Walther PPQ brass bead front sightFinally, great sights for a fantastic pistol!!! I love my PPQ but the factory sights had to go... 10-8 rear U notch and front brass bead sights were a welcome addition. Now this pistol is a 12 on a scale of one - ten. Thanks 10-8 !!!James Gober
Perfect fit, Great sight!First off, I found it very perplexing there weren't more aftermarket custom-made sight options for the PPQ...this pistol must be the best kept secret in America?? I researched the 10-8 sights for a while and seen mixed reviews, almost all negative reviews due to the sight not fitting tight enough to the slide but the explanations were puzzling so I went ahead and got both the front and rear sight. Front was a piece of cake! Old sight was off, new sight was on and fitted perfectly in place, dab of blue loctite...perfect snug fit and great sight installed in 2 minutes! Uses the Glock front sight tool, so if you don't own a Glock, buy the tool regardless! Don't try to "make do" with something else if you want it to fit it properly. Then since you have the tool already, might as well add a Glock to your collection :-). Better yet, buy the PPQ 5"!
Leave a Review