1911

1911 Hard Pin Set, blue/Carbon Steel, 11 pieces. Our pins are turned from hardened stock, and are superior to cheap factory pins made from mild steel. Broken or worn pins can cause your 1911 to fail you when you need it most. This pin set is an...

1911 Hard Pin Set, stainless steel, 11 pieces. Our pins are turned from hardened stock, and are superior to cheap factory pins made from mild steel. Broken or worn pins can cause your 1911 to fail you when you need it most. This pin set is an affordable...

1911 Spring Guide. GI format spring guide with beveled head to prevent damage to lower lugs of barrel. Head geometry and dimensions are optimized for correct slide travel, even with common buffers installed. Heavily tumbled to remove sharp edges...

1911 Commander Spring Guide. GI format spring guide with beveled head to prevent damage to lower lugs of barrel. Heavily tumbled to remove sharp edges. Stainless steel, natural finish. Fits all 1911 Commander sized 1911s (4.25" barrel) and clones in all...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

Barrel Bushing for 1911 Government Model, all calibers. Machined from stainless steel with natural finish. Flange is .100" thick and matches perfectly with the 10-8 Spring Plug or most Colt/GI style plugs. Flange has carry bevel machined into outside...

***Update 02/05/2024: We are no longer able to get restock on the physical DVD. However, my Patreon's "Charlie" Tier (CLICK HERE) has a year long 1911 build class which covers all these same topics. The archived recordings are available to...

Our flat head grip screws are made to the original GI print, and have a concave slot profile to allow the use of a cartridge rim as a field expedient screwdriver.  Set of 4. Prehardened carbon steel bar stock with blued finish.  For standard...

Our flat head grip screws are made to the original GI print, and have a concave slot profile to allow the use of a cartridge rim as a field expedient screwdriver.  Set of 4. Prehardened 416 stainless bar stock with natural finish.  For...

Our classic concave spring plug. Plug end protrusion is .100" with plug length (minus protrusion) of 1.0".  Machined from stainless steel, natural finish. Fits Commander Models with 4.25" bushing barrels only. Please note that 1911's with...

Our classic concave spring plug. Plug end protrusion is .100". Machined from stainless steel, natural finish. Fits all full sized 1911/Government Models with 5" bushing barrels.  

**For Springfield Emissary, and Prodigy models ONLY, which have a 4.25" CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.   **IF YOUR GUN HAS A BARREL BUSHING, THIS IS NOT FOR YOUR GUN!  You...

**For Springfield TRP Operator, Emissary, and Prodigy models ONLY, which have a 5" Government Model length CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.   **IF YOUR GUN HAS A BARREL BUSHING, THIS...

Features a solid aluminum shoe with a serrated face in bead blasted natural finish, a full width stainless steel bow, and a fixed stainless steel overtravel stop permanently mounted from the rear of the shoe. This trigger eliminates all issues associated...