Loading... Please wait...

Walther PPQ Rear Sight

  • Image 1
  • Image 2
  • Image 3
  • Use a diamond hone to file the front of the base to achieve the desired fit.
Calculated at checkout

Product Description

Walther PPQ rear sight, .140" wide U notch.  Fits Walther PPQ M1/M2 as a direct replacement for factory rear. Factory notch is .180" wide. Total sight height (from base of sight to top) of factory and our rear sight is .315".  Black QPQ finish, equivalent to factory Melonite type finish on slide.  Compatible with .180" tall front sight such as the factory front (.140" wide) or 10-8 front sights (.125" wide).

Requires minor fitting - our rear sight is a friction fit with a set screw. The factory rear sight is plastic with a windage screw, which is eliminated in our design.  Due to the surface hardness of the QPQ finish, you will want to use a diamond file or hone to fit the dovetail (see photo gallery), as a steel file will not cut through the surface hardness.  


**Due to the relatively uncommon nature of the various other Walther polymer pistols, we have not tested our sights on the other models.  It is our understanding that these will also fit the Walther P99, PPS and PPX.

Find Similar Products by Category

Write your own product review

Product Reviews

Previous | Showing reviews 11-20 of 36 | Next

  1. Walther Front sights to use with 10-8 Rear Sights 5 Star Review

    Posted by on 23rd Jul 2016

    I bought these rear sights for my PPQ and although I like the narrower notch, they are shorter than the stock rear sights which makes all my shots about 3 inches low at 15 yards using the supplied stock front sights. Walther has a 6 pack of front sights for about $35 numbered 1 through 6. There is .012 inch difference between each number. The PPQ is fitted with a #4 from the factory. I bought the set and installed the #1 and the gun now shoots accurately now. Just for your information.

  2. Fast Delivery and Excellent Product 5 Star Review

    Posted by on 27th Jun 2016

    The product shipped fast and the rear sight is exactly as advertised. I am very happy with my purchase. Take your time sanding the sight for proper fit and the install was very straight forward.

  3. When only the best will do 5 Star Review

    Posted by on 16th Jun 2016

    Got new and improved sights for my Walther, PPQ, M2, 45. These are awesome. Buy with utter confidence.

  4. outstanding 5 Star Review

    Posted by on 14th Jun 2016

    Since I don't like three dot sights I'm biased towards the belief that this sight should be OEM. While the notch is narrower than the equipped PPQ sights I still have plenty of light around the front blade. The u-notch makes picking up aligning the front dot really easy. Solidly built, with a decent not too sharp front edge for one-handed racking. Best advice about install is as someone else commented: PATIENCE once your through the finish the metal goes quick! I recommend starting with a medium file/stone and then using a fine one to ensure a good fit.

  5. Better than stock sught on Walther POQ 3 Star Review

    Posted by on 13th Jun 2016

    Will be better qualified to review after using for a few hours of range time.

  6. Great product and value 4 Star Review

    Posted by on 14th Mar 2016

    Added this to my 5" 9mm PPQ and very pleased. Took only minutes to replace after some filing with a small diamond file. Centered on the rear slide tightened down the set screw and done.
    Nice square edge if a one handed slide racking is needed.

  7. Good Sight 5 Star Review

    Posted by on 24th Feb 2016

    great products as always.

  8. Narrow Sight View to Front Sight vs stock on PPQ M2 5 Star Review

    Posted by on 9th Feb 2016

    This rear sight makes it easier to stay on target since is does narrow the notch vs the stock rear 2 dot sight on the PPQ M2 45. It does require minimal grinding on one edge of the sight. I am not a gunsmith by any stretch but, if you have a dremel, you can do this in about 20-30 minutes. I highly recommend this sight vs the stock rear - well worth the money. Dealing with 10-8 Performance was easy.

  9. outstanding sight ! 5 Star Review

    Posted by on 5th Feb 2016

    The 10-8 Performance sight is high quality. Very well made. Slightly oversized to insure a good tight fit. If you have EVER had a sight shift within the dovetail you really appreciate the solidly built, tight fitting rear sight by 10-8 !

  10. Minor fitting = RUST 3 Star Review

    Posted by on 17th Jan 2016

    After waiting for months for this sight, I am sitting at home writing a review followed by having to spend more money ordering a file.
    I admit I should have read the description a little better, but it doesn't make sense to purchase and other wise drop in type sight and end up having to spend more money, waste time, and do work that you should not be doing if the dimensions of the sight were correct to start with. Having to use a file leaves the metal bare, which turns in to rust. So this is not a review of the sight but of the lack of consideration for the costumer that could have been avoided by cutting the sight to the correct size to begin with.

Previous | Showing reviews 11-20 of 36 | Next

Our Newsletter